HOW TO BUILD BLASTABLE WALLS  

• Build the wall with the hole already in it
• The hole sector can be split up into other sectors
• Slope the floors / ceilings - the slope must be at the same angle!
• place an SE in all hole sectors - tag them - channel,13
• place a crack (sprite # 546 -549) above the hole
• Using PGDOWN slide the crack until it is over the hole.
• Tag the crack sprite - channel,0
• The fire extinguisher (sprite # 916) can be used instead of the crack sprite
• You may want to place C9 explosives (sprite #1247) in the area
• Tag all C9 - Channel , delay until explosion (delay ranges 8 - 2000)
• Make sure you put a pipebomb or RPG in your level.
• The wall should look like this:
• 
• Download the map pictured above TUTOR2.ZIP