------------------------------------------------------------------------
IMPORTANT!!!! 

THE VIDEO WALKTHROUGHS ON THIS CD CAN BE VIEWED ONLY WITH THE REGISTERED 
COPY OF THE GAME! 

IF YOU ARE USING THE SHAREWARE VERSION OF DUKE NUKEM FROM THIS CD OR FROM 
AN ONLINE SOURCE, **DO NOT** USE THE PROCEDURES DESCRIBED IN THIS FILE OR 
IN THE BOOK!
-------------------------------------------------------------------------

Viewing Walkthrough Demos for Each Level

* Check the SYBEX forum in CompuServe (GO SYBEX) or the Sybex Web site 
(www.Sybex.com) for updated walkthrough demos for the shareware 
levels. 

* Before you can view any of the walkthroughs included in the CD-ROM, 
you must first copy BLAZE.CON into your Duke Nukem 3D directory. 
After doing this once, you will not have to do it ever again. Start 
your computer in DOS mode. (If you are in Windows, press Alt+F4 and 
select Restart the computer in MS-DOS. Insert the CD-ROM (included in 
this book) into your CD-ROM drive and access the BLAZE directory. 
Then simply copy BLAZE.CON to the hard drive directory where you 
installed the game. (The default directory is DUKE3D.)

Copying the Desired Walkthrough Demo

* If the CD-ROM included with this book is not already loaded, insert it 
into your CD-ROM drive and access the Blaze folder. (Remember to start 
your computer in MS-DOS.)

1.	Access the BLAZE directory/folder.

2.	Copy the .DMO file for the walkthrough you wish to view into 
your hard drive's Duke Nukem3D directory. The walkthrough files are 
labeled E1-L1.DMO (Episode1-Level1), E1-L2.DMO, and so on. 

(At the command line in your hard drive's Duke Nukem 3D directory, 
copy the walkthrough file so it writes over DEMO1.DMO. For example, 
enter:

	COPY D:\E2-L3.DMO DEMO1.DEMO

Note that D:\ is the usual drive letter of a CD ROM. If your CD ROM
drive uses another drive letter, subtitute that drive letter for D in
the above command. The program will prompt you whether you should write over the 
existing DEMO1.DMO file. Press Y.)

3.	Start the game and the demo, by entering the command:

	DUKE3D /X BLAZE.CON

The game will start as always and you will see the walkthrough you chose. 
(Because the main menu is automaticaly displayed over the demo, press the 
Esc key so you can view the demo at full screen size.)